Sub-Panel Installation

Running out of breaker space, or need more circuits in a garage, workshop or addition? Our sub-panel installation service in the Inland Empire adds a second panel where you need it, after confirming your main panel can support it.

Licensed & Insured
Permits & Inspections Handled
Free, No-Obligation Quotes
Open 7 Days a Week

Best for:

Garages, workshops, additions and detached outbuildings

Starts with:

A check of your main panel's spare capacity

Permits and inspections:

Arranged by our team

Serving:

Inland Empire homes from Norco to Rancho Cucamonga

Sub-Panel Installation That Brings Circuits Closer to Where You Use Them

A sub-panel is a smaller, secondary panel fed by your main panel, giving you extra circuits in a specific area. It makes sense when you need more breaker space or want power close to a garage, workshop or addition. Because it shares the capacity your main panel already has, we check that capacity before anything else.

Ideal for:

Planning a Sub-Panel Your Main Panel Can Support

Every sub-panel project starts at the main panel, because that is where its power comes from.

01

Main panel check.

We confirm your main panel has enough spare capacity to feed a sub-panel.

02

Placement and circuit plan.

We plan where the sub-panel goes and how many circuits it should hold.

03

Permit coordination.

Our team arranges the permit and inspections for the new installation.

04

Feed and install.

Licensed electricians run a dedicated feed from your main panel and mount the new sub-panel.

05

Test each new circuit.

We test the sub-panel and every circuit on it once installation is finished.

How Sub-Panel Installation Can Help Your Home

A sub-panel puts more circuits right where your projects happen. When your main panel has the capacity, it may be a simpler path than a full upgrade.

Circuits where you need them.

Breakers sit close to the garage, workshop or addition they serve.

Room to expand.

Added circuit spaces may make future projects easier when your main panel is full.

Convenient shutoffs.

Local breakers let you cut power to a workshop or outbuilding without walking back to the main panel.

Organized circuits.

Grouping one area’s circuits together may make your system easier to understand and manage.

A smaller project.

When capacity allows, a sub-panel may meet your needs without replacing the main panel.

Planning a workshop, garage project or addition? Check whether a sub-panel is enough with a free quote.

Why Inland Empire Homeowners Trust Us to Add Sub-Panels

Adding a sub-panel to a main panel that is already near its limit only moves the problem. Because we specialize in panels, we check your main panel first and say so if an upgrade should come first.

Licensed and insured electricians handle every installation under California C-10 License #999579. Permits and inspections are coordinated by our team, and the work is planned to the National Electrical Code (NEC) and local requirements.

Common Questions About Sub-Panel Installation in the Inland Empire

Do I need a subpanel or a main panel upgrade?

A sub-panel is usually enough when your main panel has spare capacity but no room for more breakers. If your home already uses most of its capacity, a main panel upgrade is usually the better fit. Our assessment compares your current and planned loads so you know which route makes sense.

No, a sub-panel shares the power your main panel already provides rather than adding new capacity. What it adds is circuit space and a convenient place to distribute power to one area. If you need more total power, a larger main panel or service is the answer instead.

In many cases, yes, as long as the sub-panel and its feed are sized for the tools and equipment you plan to run. Welders, compressors and table saws can draw a lot of power, so we ask what you will use before sizing anything. Your main panel also needs enough spare capacity to feed the garage sub-panel.

Sub-panel size depends on how many circuits you need and how much power the equipment in that area will draw. The feed from your main panel has to match, and your main panel must have enough spare capacity to supply it. We work through those numbers during the assessment and explain the size we recommend.

Sub-panels are usually placed near the area they serve, such as a garage wall, a workshop or an addition. The location needs clear working space around it and must meet the NEC and local requirements. We recommend a spot during the assessment that balances convenience, code and the wiring route from your main panel.

Add the Circuits You Need Without Guessing About Capacity

Tell us where you need more circuits and what you plan to run there. We will check your main panel and recommend a sub-panel or an upgrade, whichever fits.